Heatrae Sadia 95200252 Instant Water Boilers – Shop4 Electrical

Description

Features:

Intelliboil technology for the efficient management of the boiling cycle.
Easy installation with autocommissioning.
Integral electronic water conditioner makes Supreme less prone to scale.
‘Power on’ indicator.
‘Ready’ indicator confirms when ready for use.
Engineering grade thermoplastic water container.
Detachable steam condensing chamber for easy service access.
Modular construction ensures easy maintenance.
Retains same footprint, service connections and wall fixings as previous models.
Easy to clean white high impact thermoplastic outer casing.
Up to 45 cups immediate draw-off depending on model.
Two year on-site parts and labour guarantee.
BEAB approved.
kiwa approved to UK Water Supply Regulations.
Made in the UK.

Capacity – 15 cups at one time (10 mugs)
Rating – 2.5kW @ 240V. (2.3kW @ 230V) to recover 135 cups* per hour.
Outer casing – White high impact thermoplastic.
Thermal insulation – CFC/HCFC free (ODP zero) pre-moulded polystyrene and thermoplastic blend.
Water container
– Moulded Polyphenylene Sulphide.
– Removable steam condensation chamber for maintenance access.
Heat unit – Low watt density Superloy element for long life.
Thermostat
– Electronic to control water temperature up to boiling point.
– Electromagnetic wave generator to reduce limescale formation.
Safety features
– All models are low pressure vented.
– Dry start protection by self resetting bi-metal thermal cut-out.
– Boil dry by protection by manually resettable disc-type bi-metal cut-out.
Approvals
– BEAB and Kiwa approved to UK Water Supply Regulations.
– Manufactured in the UK in a BS EN ISO 9001:2008 registered factory.

Fixing

Supreme units have a fixing template and hook-on brackets for wall-mounting, ideally over a draining board or drip-tray. Clearance should be allowed all around the unit for maintenance (refer to instructions).

Retrofit

Supreme retains the same footprint, service connections and wall fixings as previous Supreme models.

Plumbing

Cold water feed should be taken directly from the mains min pressure 0.5 bar (7psi) max pressure 10 bar (145psi). Bottom or rear entry is possible using 15mm push-fit connections.

Electrical

Supply (bottom or rear entry) 2.5kW units can be taken from a suitable ring final circuit via a fused spur but must be via a double-pole linked isolating switch with a minimum break capacity of 10.5A.
All electrical work must comply with the latest IEE wiring regulations.

Dimensions: