Description
The Expansion Vessel, when fully charged, will absorb all expanded water produced by the Multipoint heater during normal operation.
Connection ” BSP male; Pre-charged 4.1 bar.
The Check Valve prevents backflow of hot water and eliminates any possibility of cross contamination between cold and hot water.
Connection 15mm x 15mm compression.
The Expansion Valve opens at 6 bar (87 psi). It acts as a back-up to the expansion vessel.
Connections Inlet ” BSP male; drain ” BSP female.
Installation Pack U2, where used, must be installed in close proximity to the heater on the inlet side.
Technical Information
| Thread Size | 1/2in BSP |
| C/w Waste | N |
| Thermostatic | N |
| Mixing | N |
| Minimum Operating Pressure | 4.1 Bar |
| C/w Humidistat | N |
| C/w Pullcord | N |
| Ean Code | 5012496703513 |
| End Type | Male |
| Product | Water Heating Accessory |
| Type | Expansion Vessel |
| Use | Domestic & Commercial |
Reviews
There are no reviews yet.