Heatrae Sadia 95.050.148 Unvented Water Heaters – Shop4 Electrical

Description

Features
Available in 10 litre (suitable for up to two basins) and 15 litre (suitable for up to three basins) capacities.*
2.2kW element rating.
Replaceable copper inner container with integral heating element.
Two year guarantee with on-site service support.
Externally adjustable thermostat from 10C to 70C.
CFC/HCFC free (ODP zero) flame-retardant expanded polystyrene.
Element On’ indicator.
No anode to inspect or replace.
Suitable for use with any standard tap or mixer.
Fitted with 1 metre of 3-core cable.
Comprehensive installation instructions.
Pressure relief valve supplied with all models.
IPX4 rated.
Kiwa approved to UK Water Supply Regulations. CE marked.
* Figures are for guidance only, the Heatrae Sadia Specification Advice Team should be contacted to discuss requirements for specific sites. Capacity recommendations are based on BS 6700.

Specification
Capacities:
10 and 15 litres.
Rating:
2.2kW @ 240V, (2kW @ 230V).
Outer casing:
White plastic top moulding with steel base and centre section, finished in white stove enamel.
Thermal insulation:
CFC/HCFC free (ODP zero) flame-retardant expanded polystyrene.
Water container/integral heat unit:
Replaceable heavy gauge copper inner container, designed for 6 bar working pressure and type tested to 20 bar (290 psi), with embedded rod-type element sheathed in corrosion resistant alloy.
Thermostat:
Rod-type externally adjustable from 10C to 70C.
Safety features:
Pressure relief valve set to open at 6 bar.
Resettable over temperature cut-out.
Anode:
Not required.
IPX4 rated
Approvals:
Kiwa approved to UK water supply regulations.
CE marked. Manufactured in the UK in a BS EN ISO 9001:2000 registered factory.